2006 Changes & Improvements

Engine

1. Hex head fastening screws

2. Weather proof air cleaning system

3. Simplified exhaust system

4. New header fastening system for exhaust pipes

5. New ignition system (Starting January production*)

6. Improved quality breather pipe

Gearbox

1. Neutral light cut off for reverse

2. Hex head fastening screws

3. Improved clutch slider

4. Improved speedometer cable seal

5. Extended drive shaft splines

Final drive

1. Use of final drive lock nuts

2. Knob style dipstick removable by hand

3. Nylock nuts used to secure final drive to swing arm 

4. Labeled final drive engagement lever

Motorcycle

1. Capped steering headlock

2. Mounting of vacuum fuel valve without adapter (Starting January production)

3. New wire harness (Tourist, Patrol, Troyka, Gear Up)

4. Sidecar fuse block with power outlet

5. Floating disc for front disc brake (Troyka and Retro)

6. Improved sidecar brake plate

7. Improved rear brake pedal

8. Strengthened turn signal mount

9. Mechanically operated rear and sidecar wheel brakes (Retro)

10. Foot pedal on central stand (Retro)

*Early release 2006 models will come with improved “Type 5” Ignition.

January 06 production and on will come with Ducati Ignition system.

Accessories

Improved fuel can holder

Reusable touch-up paint containers

New shovel cover

Dual purpose grips for Gear-up models

Removable sidecar interior panels attached with 3M Velcro

New Name plate emblems for all models

New more complete tool kit, including a new bag

Quality Improvements for 2008 Ural Models

Power Train

Complete new valve train including: 7mm valve stems, sealed valve guides, hardened valve seats, and stiffer valve springs. Testing at the factory has shown great results with this new valve train, valve performance is much more accurate at high RPM�s and the heavier springs allow less valve �floating�. With the addition of precision valve guides and seals we expect less oil consumption and wear.

Modified Denso adapter with updated seal position prolonging the life of the seal.

New clutch springs (Italy) that are stiffer providing smoother clutch engagement and prolonged clutch life. These springs also provide more consistent clutch action in off-road conditions.

Herzog final drive bevel gears that are stronger and properly heat treated for prolonged life, tighter tolerances, and cooler running temperatures (Note: not official; earliest availability is summer 2008)

 Chassis

Shock absorbers from Sachs (Italy) with better dampening and stiffer springs.

Pivot bearings installed in place of bushings in both front and rear swing arms allowing smoother range of movement, more precise handling and suspension action.

Tapered steering head bearings (SKF) that last longer with less need for adjustment and/or replacement.

Steel braided brake hoses on all models increase braking power and feel at the lever.

Improved bench seat has softer foam that is more comfortable.

Other

New tool kit (Italy) that is more complete and better quality.